Nvidia

I finally figured out why I kept on getting VIDEO_TDR_FAILURE BSOD’s when installing Windows 8 on my SuperMicro workstations. It turns out that the problem goes away when I use a PCIe slot associated with CPU #1, instead of a slot associated with CPU #2. Some history on my adventures with Windows 8 and SuperMicro SuperWorkstations: I got ACPI_BIOS_ERROR BSOD’s while installing Windows 8, SuperMicro provided a Beta BIOS that resolved the problem. The Windows 8 install hangs if installing to an SSD drive on an LSI 2308 SAS controller, that issue is still unresolved, but can be worked around by connecting the SSD to the Intel SATA controller. I got VIDEO_TDR_FAILURE BSOD’s while installing Windows 8 with an NVidia Quadro 5000 graphics card, same with an ATI FirePro V7900 or an NVidia GeForce GTX 680 or an ATI HD 7970. And this post is about resolving that problem. ...

I got Windows 8 RTM installed on my two SuperMicro SuperWorkstation machines, with a bit of trouble along the way, but nothing I could not work around. But, I ran into a problem with NVidia Quadro 5000 cards causing a VIDEO_TDR_FAILURE BSOD during the Windows 8 install process. I was running my two workstations with ATI FirePro V7900 graphics cards, but I decided I wanted a bit more rendering horsepower. I wanted a card that had a good balance between modern architecture, great 2D performance, good 3D performance, OpenCL or CUDA support, and reasonable power consumption. I found the Tom’s Hardware Workstation Graphics 2012 benchmark site to be very informative, and I decided that the NVidia Quadro 5000 was a very good choice. ...

In a previous post I reported that my SuperMicro SuperWorkstation 7047A-T failed to install Windows 8 or Windows Server 2012 due to an ACPI_BIOS_ERROR. I contacted SuperMicro support, and I was informed that new BIOS releases are on their way that will support Windows 8 and Server 2012. This morning I received an email from SuperMicro, with a new Beta BIOS for the X9DAi motherboard used in the 7047A-T. The new BIOS allowed me to install Windows 8 and Server 2012. ...

As I was testing the ID11, I noticed differences in the thermal behavior based on how the case was positioned. I tested three positions; case open, case vertical, and case horizontal. This is the fifth post in a series of posts related to the Zotac ZBOX ZBOXHD-ID11. Summary: Place the case in a vertical position for best cooling. I used the Beta BIOS for testing. I let the system sit idle, placed it under load, then back to idle, while I recorded the fan speed and temperatures. The ambient temperature was 21C / 70F. ...